Liquid Turbine Flow Meter
Liquid Turbine Flow Meter
Liquid turbine flow meter
Working principle
Liquid turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle.
As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing.
The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine.
The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.
Application
1.Liquid turbine flow meter is suitable for petroleum, chemical, metallurgical and other sectors, and are used for measurement of low-viscosity liquids such as water, gasoline, and diesel.
2.It has advantages such as long service life, high accuracy and strong reliability. The pressure loss is extremely small.
Features
*Accuracy 0.2%, 0.5%, 1% optional
*Wearable Tungsten carbonized shaft and bearing, be the same with the medium of sully
*Erode-resistant Be the same with sea water, ammonia, acetometer, etc.
*Bi-direction Measuring bi-direction flow (optional)
*Power supply 24V DC
*Explode-proof Ex dBT4
Technical parameter
| Product name | Liquid Turbine Flow Meter |
Nominal Diameter(mm) | DN4-DN200mm |
Medium | Water,diesel,oil,fuel,hydraulic oil,gas ,LPG,etc |
Accuracy Class | The standard type is 1%,Customized for 0.5% and 0.2% |
Instrument material | SS304; SS316; etc. |
Medium Temperature | Medium:-20~120℃ |
Connection | Thread,Flange, Tri-clamp |
Signal Output | 4-20mA or pulse output |
Supply Power | AC220V, DC12-24V or Lithium cell Batery |
Signal Line Interface | Internal thread M20×1.5 |
Explode-proof Class | ExdIIBT6 |
Protection Class | IP65 |
Keywords | turbine flow meter for water juice |
Turbine flow meter type
Factory
