2 Inch Water Flow Meter

2 Inch Water Flow Meter

2 Inch Water Flow Meter

1. Pipe diameter: DN6-DN2800
2. Type: remote type, integrated type, plug-in type
3. Lining material: neoprene, PTFE, PFA, FEP, F46
4. Electrode material: SS316L, HC, HB, Ti, Tan, Pt

The 2 inch water flow meter consists of two parts: a sensor and a converter. It is based on the principle of Faraday’s law of electromagnetic induction and is used to measure the volume flow of conductive liquids with a conductivity greater than 5μS/cm. It can measure instantaneous flow and cumulative flow. It is an inductive instrument for measuring the volume flow of conductive media.

In addition to measuring the volume flow of general conductive liquids, it can also be used to measure the volume flow of strong corrosive liquids such as strong acids and alkalis, and uniform liquid-solid two-phase suspension liquids such as mud, ore pulp, and paper pulp, sewage and wastewater. It is widely used in flowmeters in petroleum, chemical industry, metallurgy, textile, papermaking, environmental protection, food and other industrial sectors, as well as municipal management, water conservancy construction, river dredging and other fields.

2 inch water flow meter2 inch liquid flow meter
Sanitary 2 Inch Liquid Flow MeterRemote Stainless Steel Liquid Flow Meter

Features :

1. Digital quantity processing, strong anti-interference ability, reliable measurement, high precision, flow measurement range up to 150:1

2. Ultra-low EMI switching power supply, suitable for a wide range of power supply voltage changes, and good anti-EMI performance. Optional power supply mode: AC 85V-264V, DC18V-36V, battery power supply

3. It adopts 16-bit embedded microprocessor, which has fast calculation speed and high precision. The frequency can be programmed for low-frequency square wave excitation, which improves the stability of flow measurement and low power consumption.

There are no moving parts in the pipeline, no flow blocking parts, and almost no additional pressure loss during measurement.

4. High-definition backlit LCD display, full English menu operation, easy to use, easy to operate, easy to learn and understand.

5. It has the function of self-inspection and self-evaluation.

6. The hourly total volume recording function, which records the total volume flow in hours, is suitable for time-sharing measurement systems

7. There are three built-in accumulators, which respectively display forward accumulation, reverse accumulation and difference accumulation. There is a power-off timer inside, which can record 16 times of power-off time.

Selection of water flow meter lining:

lining materialmain performancescope of application
hard rubberGood wear resistance, excellent elasticity, high tear resistance, corrosion resistance to general low-concentration acid-base salt medium, not corrosion resistance to oxidizing medium.<80°C, general water, sewage, mud, ore slurry
PolyurethaneIt has excellent wear resistance, but slightly poor acid and alkali resistance.<60°C, neutral, strong abrasive slurry, coal slurry, mud.
PTFEA material with the most stable chemical properties, it can withstand boiling hydrochloric acid, sulfuric acid, nitric acid and aqua regia, concentrated alkali and various organic solvents, but it is not resistant to chlorine trifluoride and high temperature oxygen difluoride.<180°C, strong corrosive media such as concentrated acid and alkali, and hygienic media.

Chemical stability, electrical insulation, lubricity, non-stickiness and non-flammability are similar to PTFE, but F46 material strength, aging resistance, temperature resistance and low temperature flexibility are better than PTFE. It has good bonding performance with metal, better wear resistance than PTFE, and has better

tear resistance properties.

<180°C, hydrochloric acid, sulfuric acid, aqua regia and strong oxidants, etc., hygienic medium


1. Question: How to install the water flow meter model?

A: We can provide manuals for water flow meter types, please feel free to contact us.

2. Question: How to choose lining material and electrode material?

Answer: Yes. According to the characteristics of your measured medium. We have professional guidance to help you choose the right flowmeter.

3. Q: Can I get samples?

A: Yes, we have materials in stock and can help you get samples as soon as possible.

4. Q: Can you provide the shortest delivery time?

A: We have the material in stock, if you really need it, you can tell us, we will try our best to satisfy you.

5. Q: Can I visit your factory?

A: Of course, we will help you to visit our factory if you need.

6.Q: How to pay?

A: We can accept: TT payment, online credit card payment, Western Union payment, LC payment

Slurry Application Flow Meter Calibration Set:

Our factory has professional calibration equipment and professional calibration engineers. When the flowmeter for mud application leaves the factory, professional calibration engineers use the 5-point calibration method to calibrate the flowmeter one-to-one to ensure that the accuracy of the flowmeter can reach 0.5%, and the highest can reach 0.5%. up to 0.2%.

Register an Interest

Provide Your Information